Aircooled Volkswagen Forum banner

Drilling a 4 dowel crank to 8 dowel

1691 Views 3 Replies 3 Participants Last post by  1bad67
1 - 4 of 4 Posts
Good article, we may have to get one to do some 8 doweling ourselves!
Yea just might do that!

You need to read through Bob's blogs. Time consuming but he has some good tech stuff
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.