Aircooled Volkswagen Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
7 Posts
Thank you! Yes, this little thing is quick! Really fun to drive.
Hello all,

I just purchased an interesting car and build. I have a few questions I’m hoping some of you can help with…

Here are the specs…
Case: Type 1 VW dual relief, from Rimco
Displacement: 1914cc
Crank: 69mm, balanced and wedgemated
Rods: Carrillo (forged steel)
Pistons & Cylinders: Cima 94mm (forged Cima Cylinders)
Rings: Total Seal
Cam: Web Cam 116
Oil: Racing Valvoline 20W-50
Heads: VW 040, Dual Port, port-polished by Rimco
Valve size: 40mm intake and 35mm exhaust (titanium)
Compression: 7.0:1
Rocker arms & shafts: Pauter Machine, 1.4:1
Pushrods: chromoly, 3/8-inch
Ignition: MSD 6AL, MSD Distributor, MSD coil
Turbo: Rajay 40 with Turbonetics 12lb wastegate
Carburetor: Dell’Orto 40 sidedraft
Intake manifold: Ron Lummus (custom)
Exhaust: Rob Lummus (custom), all stainless steel, all exhaust work done by Ron Lummus himself
Fanshroud: 911 style by Autocraft (crankshaft by Autocraft)
Dyno: 185bph on 10lb boost
View attachment 14077 View attachment 14080
View attachment 14079
View attachment 14078
View attachment 14076
My question:
Can/Should I install exhaust cover and turbo blanket on this engine? I’m thinking tin is the way to go due to the oil dripping type of engine (possible fire hazard). Lol… but maybe turbo blanket is ok? Let me know, I’m getting to hot at stoplights! Lol 😂 Thanks everyone, Ryan
Hello all,

I just purchased an interesting car and build. I have a few questions I’m hoping some of you can help with…

Here are the specs…
Case: Type 1 VW dual relief, from Rimco
Displacement: 1914cc
Crank: 69mm, balanced and wedgemated
Rods: Carrillo (forged steel)
Pistons & Cylinders: Cima 94mm (forged Cima Cylinders)
Rings: Total Seal
Cam: Web Cam 116
Oil: Racing Valvoline 20W-50
Heads: VW 040, Dual Port, port-polished by Rimco
Valve size: 40mm intake and 35mm exhaust (titanium)
Compression: 7.0:1
Rocker arms & shafts: Pauter Machine, 1.4:1
Pushrods: chromoly, 3/8-inch
Ignition: MSD 6AL, MSD Distributor, MSD coil
Turbo: Rajay 40 with Turbonetics 12lb wastegate
Carburetor: Dell’Orto 40 sidedraft
Intake manifold: Ron Lummus (custom)
Exhaust: Rob Lummus (custom), all stainless steel, all exhaust work done by Ron Lummus himself
Fanshroud: 911 style by Autocraft (crankshaft by Autocraft)
Dyno: 185bph on 10lb boost
View attachment 14077 View attachment 14080
View attachment 14079
View attachment 14078
View attachment 14076
My question:
Can/Should I install exhaust cover and turbo blanket on this engine? I’m thinking tin is the way to go due to the oil dripping type of engine (possible fire hazard). Lol… but maybe turbo blanket is ok? Let me know, I’m getting to hot at stoplights! Lol 😂 Thanks everyone, Ryan
My old Fiat 50 years ago.
Vehicle Photograph Ecoregion Motor vehicle Green
 

·
Registered
Joined
·
7 Posts
My old Fiat 50 years ago. View attachment 14103
The weakest part was the Fiat transaxle and the rubber axle joints. The engine was a 40 horse built out to 1600. I modified a VW input shat and made the adaptor plate. I used 124 rear wheels. I paid $20 for the Moon fuel tank and the seats were patio chairs. The carb is a Bug spray.
Tire Wheel Car Land vehicle Vehicle

S&S headers. I drove it around Pomona, Ca. My friends would take turns hauling ass in it till the trans blew up. My friend Lloyd Moser owned the Little Giant Killer which he bought from Rich Bays. Lloyd chopped the top. Rich ran a Porsche engine. They used the VW transaxle.
 

·
Registered
Joined
·
7 Posts
The weakest part was the Fiat transaxle and the rubber axle joints. The engine was a 40 horse built out to 1600. I modified a VW input shat and made the adaptor plate. I used 124 rear wheels. I paid $20 for the Moon fuel tank and the seats were patio chairs. The carb is a Bug spray. View attachment 14115
S&S headers. I drove it around Pomona, Ca. My friends would take turns hauling ass in it till the trans blew up. My friend Lloyd Moser owned the Little Giant Killer which he bought from Rich Bays. Lloyd chopped the top. Rich ran a Porsche engine. They used the VW transaxle.
Here is Frenchy's Fiat
Car Wheel Tire Vehicle Motor vehicle
 
1 - 6 of 6 Posts
Top