Aircooled Volkswagen Forum banner
1 - 1 of 2 Posts

· Registered
6,120 Posts
I prefer an aluminum seat.

NHRA Section 16 - General Regulations
6:2 Seats

".....seats must be bolted with four bolts and nuts and washers.........all seats must be properly braced, framed, supported and constructed of aluminum, fiberglass, carbon fiber, or double layer poly. Single layer poly must have steel tube framework....."

I have seen the inserts in poly seats pull out.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.